-
High voltage bushing supplier
High voltage bushing.Standard: GermanFittings of the transformers
-
low voltage porcelain bushing
Low voltage porcelain bushingStandard:Germany
-
High voltage bushing -ANSI
# ANSI standard # high voltage #bushing
-
porcelain bushing supplier -ANSI
Low voltage porcelain bushing standard:ANSI
-
Spring customized spring
Spring with different materials are big demands during the production of distribution transformers,honest and reliable factory with experienced engineers are indispensable.All of kinds of springs can be made according to the drawings/samples.
-
Sealing ring
The rubber sealing ring is an annular cover composed of one or several parts, which is fixed on a ring or washer of the bearing and contacts with another ring or washer or forms a narrow maze gap to prevent the leakage of lubricating oil and the invasion of foreign objects.
-
tappimg changer
This switch is suitable for frequency 50, 60Hz, rated voltage 10.35Kv, rated current 20-250A, three-phase oil-immersed transformer, voltage regulation parts have two kinds of middle and neutral point, can be directly fixed in the transformer box cover or box wall, in the no excitation state tap exchange.
-
pressure relief valve
Purpose and performance of pressure relief valve Pressure relief valve is applicable to oil immersed power transformer, power capacitor and cut-off switch to protect oil tank. When the oil immersed transformer fails in operation, due to overheating of the coil, part of the transformer oil is vaporized, and the pressure in the transformer oil tank increases rapidly. At this time, the pressure relief valve acts rapidly within 2ms to protect the oil tank from deformation or bursting. When the pressure in the oil tank rises again and reaches the opening pressure, the pressure relief valve will operate again until the pressure in the oil tank drops to the normal value. At the same time, it can also effectively prevent external air, dust, impurities, moisture, etc. from entering the running transformer, thus protecting the transformer from damage.Installation and use of pressure relief valve1. The pressure relief valve is generally installed on the oil tank cover or side wall of the transformer2. The pressure relief valve of flange connection structure shall be equipped with flange base.3. Hole size of threaded products on the transformer tank cover (see the installation dimension and specification table)4. Each product is equipped with a safety helmet or tablet, but it is only convenient for users to use during the overall sealing test of the transformer, and must be removed before operation.