Description:

Electric vehicle power supply charging pile,can be fixed on the ground or wall, installed in public buildings

 (public buildings, shopping malls, public parking lots,etc. And residential parking lots or charging stations, 

and can charge various types of electric vehicles according to different voltage levels.

Parameters:

Product Safety Precautions:

Safe to Use

(1) Do not put flammable, explosive or combustible materials, chemicals,

 flammable vapors and other dangerous items near the charging gun.

(2) Keep the charging gun head clean. If it is dirty, please wipe it with a clean dry cloth.

It is strictly forbidden to touch the charging gun core with your hands when charging.

(3) Do not attempt to disassemble, repair,or modify the charging pile.

If there is a need for maintenance or modification, 

please contact the staff.Improper operations may cause damage, water leakage, and electricity leakage.

(4) If there is any abnormal situation during use, all input and output power can be cut off immediately.

(5) In case of rain and thunder,please charge carefully.

(6) Do not allow children to approach and use the charging gun during the charging process to avoid injury;

(7) During the charging process, the vehicle is prohibited from driving ,

and charging can only be performed after the electric vehicle is turned off.

Line Requirements Notes:

(1)16A use not less than 2.5 square meters of national standard copper wire(≥2.5 square copper wire), and aluminum wire is prohibited.

(2)32A use no less than 6 square meters of national standard copper wire( ≥6 square copper wire), and aluminum wire is prohibited.

Precautions for space requirements

(1) 16A uses a 16A special socket, and the air switch is not less than 20A

(2) 32A uses a 2P air switch.When using a special meter, the air switch should not be lower than 40A.

When the charging pile and household appliances share a meter, the air switch should not be lower than 60A.

Instructions for use

1. Plug And Charge/display Model

(1) Turn off the vehicle, pull the handbrake, and lock the door;

(2) After the power plug is successfully connected, plug the charging gun into the car charging port,

and charging it by itself after the connection is successful;

(3) After charging, first unplug the charging gun, then unplug the power plug/turn off the air switch power supply;

(4) The display interface and indicator interface are as shown above.

Current switching/reservation

(1) Turn off the vehicle, pull the handbrake, and lock the door;

(2) After the power plug is successfully connected, plug the charging gun into the car charging port,

 and change it by itself after the connection is successful;

(3) After charging, first unplug the charging gun, then unplug the power plug/turn off the air switch power supply.