Overview:
DDS3666 Type Single phase electronic watt-hour meter (hereafter: electronic energy meter DDS) adopts special large scale integrated circuit,
with less peripheral components, simple structure, high reliability, low power consumption,
long life and other characteristics, can be used to measure the rated frequency 50hz AC active power.
The product performance indicators in line with the GB/T 17215.321-2008(level 1 and level 2 stationary type ac watt-hour meter”
standard of all the technical requirements of single phase electronic watt-hour meter.
Question:
What is the difference between phase 1 and phase 3 meter?
Three phase and single phase are electricity supplies and it's the amount of power that is different.
A single phase supply is smaller and most domestic houses with gas central heating need single phase and have this as standard.
If you require two or more electricity meters then you need a three phase supply.
Function and characteristics:
1. Active energy metering, long-term work without adjustment
2. Adopt ADE7755 special metering chip
3. Using the latest foreign power ASIC with digital multiplier;
The dynamic working range of the instrument is greatly improved, and the actual overload capacity is more than 10 times.
4. The error linearity is good in the range of 5% IB~IMAX
5.Few peripheral components, low power consumption, simple structure
6.All the components in the meter are selected as long-life, highly reliable electronic and electrical parts,
so it has the characteristics of long life and high reliability.
7.Display mode: counter, LCD
Technical parameter of this products: electronic energy meter DDS:
Rated current (A) | 1.5(6),2.5(10),5(20),5(30),10(40),10(60) 15(60),20(80),30(100) |
Rated Voltage(V) | 220 or 240 |
Rated Frequency (Hz) | 50 or 60 |
Accuracy Level | Level 1 or level 2 |
The appearance and the installation dimensions: